Get free quotes

Surge & earthing supplies

Tie every metal part together so a surge has nowhere to jump

Free quotes from earthing material suppliers across South Africa. One request, no obligation.

A copper main earth bar with green and yellow earthing cables and bonding clamps on a pipe beside a geyser
BondedEvery metal part joined
Bond every metal partEarth 7.5 Ω · LP-EAR-834

At a glance: Earthing Cable, Bars and ClampsLP-EAR-834

Suits
Homes, plants, farms and solar arrays
How it works
Bond all metal parts into one earth
Range
Cable and tape by the metre, clamps per joint
Check first
SANS 10142-1 and SANS 62305 sizes
Lead time
Usually from stock at a wholesaler

Earthing cable, earth bars and bonding clamps tie the metal parts of a building into one earthing system. When lightning strikes nearby, the voltage on every earthed part rises together, so current does not jump from a geyser pipe to a wiring conduit or from a steel frame to a DB board. This page covers the materials: bare copper and green and yellow cable, earth tape, earth bars, clamps for pipes and structures, test clamps, bimetal connectors and earth plates. Send a request and independent suppliers and earthing contractors quote you directly.

Cable and tape

  • Green and yellow insulated cable: the familiar earth conductor inside the electrical installation, sized by the electrician to SANS 10142-1.
  • Bare copper conductor: stranded or solid, for buried rings and links between electrodes.
  • Copper or tinned copper tape: 25 x 3 mm is common for buried rings and earth links.
  • Galvanised steel tape: lower cost and less attractive to thieves.

The standard sets minimum sizes for lightning protection conductors, so ask the designer, and see down conductors for the roof and wall runs.

Earth bars, clamps and connectors

The main earth bar is where the electrical earth, the lightning earth, telecom and solar earths meet. Bonding clamps connect water and gas pipes, geysers, steel columns and roof sheeting. Test clamps let a down conductor be disconnected from its earth for measurement. Bimetal connectors join copper to aluminium without the corrosion you get when they touch. For permanent buried joints, many contractors use exothermic welding, which fuses the conductors into one piece.

Earthing and bonding in practice

Bonding matters most where metal from different systems meets: the geyser and its pipes, a gas installation, a steel carport attached to the house, an aluminium-framed solar array, a borehole pump and its steel column. Every earth on the site should end up as one system, see earthing installation. Where a lightning conductor runs near metalwork, the designer decides whether to bond it or keep a separation distance.

A missing bond is one of the most common faults found after a storm. Someone replaces a geyser and leaves off the bonding clamp, a plumber swaps copper pipe for plastic and breaks the earth path, or a new steel structure is bolted to the house without a link. After building or plumbing work, ask the electrician to check that every bond is back in place.

Plates, pits and theft

Earth plates and buried tape suit rocky ground where earth spikes will not go deep. Inspection pits keep joints accessible for testing. Copper theft is a real problem, so ask about aluminium or steel alternatives above ground, covered joints and lockable test boxes. Buy clamps and connectors sized for the exact conductor you are using, because a clamp that is too large never grips properly and loosens over time. When ordering, give the supplier a list of joints as well as metres, since the fittings often add up to more than the cable.

What to put in your request

  • What you are earthing or bonding, and where
  • Metres of cable or tape, and the size if known
  • Copper, tinned copper, aluminium or galvanised steel
  • How many clamps, test clamps and bimetal connectors
  • Supply only or supply and installation

Earthing Cable, Bars and Clamps for homes, thatch, estates, farms and industry

  • Homeowners: bonding the geyser, pipes and steel carport to the house earth
  • Thatched homes and lapas: bonding gutters, flues and pipes near the thatch as the designer specifies
  • Estates and body corporates: earth bars and bonding for the clubhouse, pool pumps and guardhouse
  • Offices, schools, churches and clinics: main earth bars, bonding of steelwork and rooftop plant
  • Mines, plants, tanks and towers: bonding of tanks, pipe racks, structures and instrument earths
  • Farms and smallholdings: linking sheds, silos, pumps and the farmhouse into one earth
  • Lodges, guest houses and venues: bonding plumbing, decks and metal walkways across the camp
  • Solar PV owners and installers: bonding panel frames and mounting rails to the main earth
  • Builders, engineers and electricians: earth bars, rings and bonding specified at foundation stage

Frequently asked questions

What size earthing cable do I need?
It depends on the supply, the circuit and whether the conductor is part of a lightning protection system. Inside the electrical installation the electrician sizes it to SANS 10142-1; for lightning protection, the standard sets minimum sizes the designer works to.
Can I join copper and aluminium conductors?
Not in direct contact, because the two metals corrode each other, especially when wet. Use bimetal connectors made for the purpose, and keep joints few and mechanically sound.
Does a geyser need to be bonded?
Yes, metal pipework and the geyser are normally bonded to the earthing system. A registered electrician checks this and issues a certificate of compliance for the installation.
Do you supply earthing materials yourselves?
No. We are a free quote request service. We pass your request to independent suppliers and earthing contractors who quote you directly, so you can compare materials, quantities and delivery.

Earthing Cable, Bars and Clamps by province and city

More lightning protection, supplies and services

Free quote request, no obligation

Request quotes for earthing cable and materials

Fill in the survey sheet the way an installer would on a first visit: the size and height of the building, the roof and the protection class if you know it, or simply how many arresters, plugs, spikes, metres or visits. Installers and suppliers in your area quote you directly.

Site survey sheetEarthing Cable, Bars and Clamps
Sheet
95854
Date
2026-11-18
Scale
NTS

1The job

2How many (optional, it helps the quote)

Your ordernot to scale

-
-
-
-
-
-
Estimate
-

Geometry and the standard's table figures for the request, not a design.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: rods, masts, arresters, spikes, tape or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable installers, electricians, engineers and suppliers. See our privacy policy.

Get free lightning protection quotes